July 26, 2013
By Dan Namowitz
The twin was 300 feet above minimums, descending, when ATC called with new missed approach instructions.
“Advise ready to copy.”
The pilot flying was undergoing a checkride for an air-taxi operator. The check pilot responded to the radio call.
“I said that it was a really bad time, but go ahead,” recounted the check pilot in a complaint to the Aviation Safety Reporting System, noting great displeasure at having to copy alternate missed approach instructions at such a high-workload stage.
The pilot had another beef: “The only part of that alternate missed approach that is published on the approach plate is the hold at CANBY. The directions to get there are not.”
Hard to argue that having to copy a detailed set of alternate missed approach instructions (runway heading to 1,000 feet, left turn to 110 degrees, intercept the 175-degree radial to CANBY, and hold at 4,000 feet) at 300 feet above minimums was highly disruptive.
However, it turns out that the route to alternate missed approach fixes is left vague by design.
Before any approach, instrument pilots brief on the missed approach procedure; that’s when instructions to fly the published missed approach greatly simplify matters. The “published miss” appears in both narrative and graphic form on approach plates.
In some cases an alternate missed-approach fix is also published—but without a route from the missed approach point.
“Some locations may have a preplanned alternate missed approach procedure for use in the event the primary navaid used for the missed approach procedure is unavailable,” explains the Aeronautical Information Manual.”To avoid confusion, the alternate missed approach instructions are not published on the chart. However, the alternate missed approach holding pattern will be depicted on the instrument approach chart for pilot situational awareness and to assist ATC by not having to issue detailed holding instructions.” The alternate missed approach also may use navaids not part of the approach or the primary missed approach.
Still, not something you’d want dropped in your lap by ATC in the last seconds of a descent to minimums, especially alone in your aircraft and in IMC.
During your next IFR flight’s pre-flight planning, make it a point to spread out the charts and locate any published alternate missed approach fix, giving yourself a general idea about “the directions to get there.”
Dan Namowitz is an aviation writer and flight instructor. He has been a pilot since 1985 and an instructor since 1990.
FAA Information and Services,
Find out how to determine if an alteration you want to make to your aircraft is major or minor and how to build a case for any modification you are considering.
This year has not yet come to a close, but my mind is on January 1, 2020. That’s when the FAA has mandated that aircraft must be equipped for ADS-B Out in order to operate in airspace where a Mode C transponder is required today.
Here’s a riddle: What job requires a private pilot certificate, but never asks you to leave the ground?
VOLUNTEER AT AN AOPA FLY-IN NEAR YOU!
SHARE YOUR PASSION. VOLUNTEER AT AN AOPA FLY-IN. CLICK TO LEARN MORE >>>
VOLUNTEER LOCALLY AT AOPA FLY-IN! CLICK TO LEARN MORE >>>
BE A PART OF THE FLY-IN VOLUNTEER CREW! CLICK TO LEARN MORE >>>