Not a member? Join today. Already a member? Please login for an enhanced experience. Login Now
Menu

New and revised airman certification standards publishedNew and revised airman certification standards published

AOPA notes 'clear' improvementsAOPA notes 'clear' improvements

The FAA has published the first revisions of the Airman Certification Standards (ACS) for the Private Pilot—Airplane certificate and the instrument rating for airplanes, and introduced the first ACS for the Commercial Pilot—Airplane certificate, all effective June 12.

A young student pilot with an older examiner going over the required paperwork prior to the checkride. AOPA file photo by Mike Fizer.

The revisions of the year-old ACS, and the new ACS for the commercial pilot certificate, were posted to the FAA’s Airman Testing website on May 18.

The FAA introduced the first two ACS volumes in June 2016 to replace the Practical Test Standards following a multi-year industry-driven effort to make test standards more meaningful and relevant to the way pilots fly today.

AOPA chairs the joint FAA-industry Aviation Rulemaking Advisory Committee’s (ARAC) Airman Certification System working group that developed the new standards and revisions in which practical-test tasks are organized by elements of aeronautical knowledge, decision making, and skills.

A key goal of the change was to better integrate pilot knowledge and practical testing, and to make test standards more adaptable to rapid changes in cockpit technology.

Testing under the ACS remains comparable to the superseded PTS in terms of difficulty, time, and information required. The FAA describes the ACS as a “single-source set of standards” for knowledge and practical testing.

“The ACS updates to the Private Pilot Airplane certificate and Instrument-Airplane Rating incorporate corrections and changes; streamline some areas by consolidating task elements; and standardize phrasing and the sequence of certain task elements,” said David Oord, AOPA senior director of regulatory affairs and chair of the ACS working group.

“The revisions represent the FAA listening to stakeholder feedback and making improvements,” he said.

Applicants and flight instructors should note, for example, that in the revised Private PilotAirplane ACS and the new Commercial Pilot ACS, the Area of Operation on slow flight and stalls calls for an applicant to “establish and maintain an airspeed at which at which any further increase in angle of attack, increase in load factor, or reduction in power, would result in a stall warning (e.g. aircraft buffet, stall horn, etc.).”

As of June 12, that standard will replace the current ACS slow flight demonstration consisting of establishing an airspeed “approximately 5–10 knots above the 1G stall speed, at which the airplane is capable of maintaining controlled flight without activating a stall warning.” 

That standard proved impractical in some aircraft, Oord said.

The FAA has produced a media presentation titled Airman Certification Standards; What’s New and What’s Next that details ACS modifications, updates, and background on their development.

Airnan Certification Standards are being developed for Airline Transport Pilot (Airplane); Instructor (Airplane); and Aircraft Mechanic Certificate with Airframe and/or Powerplant ratings, the FAA said.

Oord expressed appreciation for the FAA and other stakeholders following up on their resolve to seek continuous improvement in the ACS, as new volumes and revisions come on line.

“I am extremely proud of the work the group members have put in to make these new standards a reality,” he said. “The improvements, I believe, clearly speak for themselves.”

Dan Namowitz

Dan Namowitz

Associate Editor Web
Associate Editor Web Dan Namowitz has been writing for AOPA in a variety of capacities since 1991. He has been a flight instructor since 1990 and is 30-year AOPA member.
Topics: Airman Regulation, FAA publications, Flight Training

Related Articles