Already a member? Please login below for an enhanced experience. Not a member? Join today

Flight Design readies first certified designFlight Design readies first certified design

Matthias Betsch

The German company Flight Design made its mark as the leading producer of light sport aircraft worldwide, but now it plans an assault on the certified, IFR market with the four-passenger, 160-knot Flight Design C4. The first flight is expected in 2012, with deliveries of the $250,000 aircraft starting in 2013.

The engine has not been chosen but will be either a Lycoming or Continental engine de-rated to 180 horsepower for a low noise profile, said Matthias Betsch, CEO and president. There are plans as well to offer the model with a diesel engine. Flight Design is talking with Thielert about the possibility.

The company is still in talks about the certification plan in Europe. Once certified, it will be certified in the United States under a joint agreement. It is expected to have an airframe parachute.

The airplane will have a gross weight of nearly 2,700 pounds, a useful load of 1,320 pounds, and a payload of 894 pounds. It carries 71 gallons of fuel and is promised to have a range of 1,000 nautical miles.

Cabin dimensions are 54 inches in width for the front seat area and 47 inches in the rear. Betsch said the rear cabin width is four inches wider than a Cessna 172. The company is promising a fuel burn of 10.6 gallons per hour at 80 percent power, and 8.4 gallons per hour at 65 percent power with a slower speed of 145 knots true airspeed. The company will not offer financing.

Alton Marsh

Alton K. Marsh

Freelance journalist
Alton K. Marsh is a former senior editor of AOPA Pilot and is now a freelance journalist specializing in aviation topics.

Related Articles