Crosswind landings get all the glory when student pilots, pilots, and instructors share ideas about training techniques. Usually discussion centers on whether a sideslip or crabbing into the wind is preferable on final approach for maintaining a straight track down the extended runway centerline.
Less attention is lavished on crosswind takeoffs, even though poor performance will exact the same penalties as “losing it” in a crosswind landing. Although the need to maintain directional control and avoid downwind drift is the same as in a landing, takeoff technique and timing elements differ, as does the effect of takeoff engine power.
A good crosswind takeoff starts on the ramp. The pilot observes the wind condition and taxis to the runway using the correct control deflections, adjusting them each time the aircraft’s position relative to the wind changes.
When the takeoff roll begins, the upwind aileron is held fully up (yoke turned toward the wind) to prevent the wing from rising in gusts. Reduce the aileron deflection somewhat as the aircraft accelerates and the controls become more responsive.
As with any takeoff, nosewheel steering (or differential braking) gives way to rudder for directional control as the takeoff run gathers speed.
Quick quiz: Given a direct crosswind and a choice of runways, which takeoff in a single-engine trainer would you expect to be less prone to adverse forces—a left or right crosswind?
A right crosswind tends to offset a single-engine airplane’s left-turning tendency; a left crosswind amplifies it by pushing the tail to the right, an effect called weathervaning. When taking off in a left crosswind, be especially ready to use aggressive control inputs to maintain direction.
